LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
331
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:SIGN<i>[:PCC]:BAND
<Band>
CONFigure:LTE:SIGN<i>:SCC:BAND
<Band>
Selects the Operating Band (OB) for PCC or SCC. The allowed input range depends
on the duplex mode (FDD or TDD).
Parameters:
<Band>
FDD: OB1 | ... | OB31 | UDEFined
TDD: OB33 | ... | OB44 | UDEFined
UDEFined = user-defined band
OB29 only for SCC, not for PCC
*RST:
OB1 (OB33 for TDD)
Example:
See
Firmware/Software:
V1.0.15.20
V2.1.20: added OB24, OB25 and OB33 to OB41
V2.1.30: added OB15, OB16, OB22, OB42, OB43, UDEFined
V3.0.10: added OB23, OB26
V3.0.30: added OB27, OB28, OB44
V3.2.50: added SCC command, added OB29 to OB31
Options:
R&S CMW-KB036 for frequencies above 3.3 GHz
R&S CMW-KS525 for UDEFined
R&S CMW-KS502/-KS552 (FDD/TDD) for SCC
Manual operation:
See
"Operating Band, Channel, Frequency"
CONFigure:LTE:SIGN<i>:RFSettings[:PCC]:CHANnel:DL
<Channel>
CONFigure:LTE:SIGN<i>:RFSettings:SCC:CHANnel:DL
<Channel>
Selects the DL channel number for PCC or SCC. The channel number must be valid
for the current operating band. If you set the PCC DL channel number, the related PCC
UL channel number is calculated and set automatically.
By appending a Hz unit (e.g. Hz, kHz, MHz) to a setting command, you can set the
channel via its center frequency (only integer numbers accepted). By appending a Hz
unit to a query command, you can query the center frequency instead of the channel
number.
For channel numbers and frequencies depending on operating bands see
Parameters:
<Channel>
Range:
depends on operating band
*RST:
300 for PCC / 302 for SCC
Example:
See
Firmware/Software:
V1.0.15.20
V3.2.50: added SCC command
Options:
R&S CMW-KS502/-KS552 (FDD/TDD) for SCC
Manual operation:
See
"Operating Band, Channel, Frequency"
Command Reference
深圳德标仪器
135-1095-0799