LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
704
User Manual 1173.9628.02 ─ 16
Suffix:
<no>
.
1..1000
Return values:
<Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
<SegReliability>
Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.
<ChannelType>
PUSCh | PUCCh
Example:
See
Usage:
Query only
Firmware/Software:
V2.0.10
V2.1.25: increased maximum number of segments to 250
V2.1.30: increased maximum number of segments to 512
V3.0.50: increased maximum number of segments to 1000
Options:
R&S CMW-KM012
3.5.3.33
List Mode Results (All Segments, One Result)
Each of the following commands returns a selected list mode result for all measured
segments. The number of returned results depends on the number of measured seg-
ments, see
To configure the list mode use the commands described in
For a description of the list mode see
Indicated ranges apply to all statistical results except standard deviation results. The
minimum for standard deviation results equals 0. The maximum equals the width of the
indicated range divided by two. Exceptions are explicitly stated.
FETCh:LTE:MEAS<i>:MEValuation:LIST:SRELiability?
Returns the segment reliability for all measured list mode segments.
A common reliability indicator of zero indicates that the results in all measured seg-
ments are valid. A non-zero value indicates that an error occurred in at least one of the
measured segments. If you get a non-zero common reliability indicator, you can use
this command to retrieve the individual reliability values of all measured segments for
further analysis.
Return values:
<Reliability>
Command Reference
深圳德标仪器
135-1095-0799
