LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
71
User Manual 1173.9628.02 ─ 16
The bar graphs show how often specific values have been reported by the UE since
the measurement has been started. The tables below the bar graphs provide the same
information as numbers instead of bars.
The bar graph on the right shows how often the RI values 1 and 2 have been reported.
The bar graph on the left shows how often specific PMI - RI combinations have been
reported. It provides separate bars for all possible combinations. The possible PMI val-
ues depend on the number of DL TX antennas:
●
Two antennas: PMI = 0 to 3 for RI = 1, PMI = 0 to 1 for RI = 2
●
Four antennas: PMI = 0 to 15, for RI =1 or 2
chapter 2.2.19.8, "Common View Elements"
2.2.19.7
Detailed View: HARQ
The "HARQ" view provides an overview of all downlink subframe transmissions per-
formed since the measurement was started.
If you cannot access the view, check whether HARQ is enabled, see
"Miscellaneous Connection Settings Part 2"
For carrier aggregation scenarios, the PCC results and the SCC results are presented
on different tabs.
Fig. 2-28: HARQ view (two streams, absolute results)
General Description
深圳德标仪器
135-1095-0799