LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
451
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:SIGN<i>:MMONitor:IPADdress
<Index>
Selects the IP address to which signaling messages shall be sent for message moni-
toring. The address pool is configured globally via
CONFigure:BASE:MMONitor:IPADdress<n>
.
A query returns both the current index and the resulting IP address.
Parameters:
<Index>
IP1 | IP2 | IP3
Address pool index
Return values:
<IPAddress>
Used IP address as string
Example:
See
Configuring Message Monitoring
Firmware/Software:
V3.0.10
Manual operation:
See
2.6.19 BLER Measurement
The following sections describe the commands related to the "Extended BLER" mea-
surement.
Measurement Control and States
......................................................................... 451
.......................................................................................... 453
........................................................................................... 456
2.6.19.1
Measurement Control and States
The following commands control the measurement and return the current measure-
ment state.
...........................................................................................451
............................................................................................. 451
............................................................................................ 451
FETCh:LTE:SIGN<i>:EBLer:STATe?
............................................................................... 452
FETCh:LTE:SIGN<i>:EBLer:STATe:ALL?
........................................................................ 452
INITiate:LTE:SIGN<i>:EBLer
STOP:LTE:SIGN<i>:EBLer
ABORt:LTE:SIGN<i>:EBLer
Starts, stops, or aborts the measurement:
●
INITiate...
starts or restarts the measurement; the R&S
CMW enters the
"RUN" state.
●
STOP...
causes a running measurement to stop after the current evaluation
period is terminated and valid results are available; the R&S
CMW enters the
"RDY" state.
Command Reference
深圳德标仪器