Pearl-2 User Guide
Configuration preset considerations
Recorded files in a channel or recorder
A channel and recorder keep a list of recordings in the
Recordings
section in the Admin panel. These files
remain on the system even if the channel or recorder configuration is changed or removed as a result of
applying a configuration preset.
For example, prior to applying your configuration preset, you have channels with indexes 1, 2 and 3; each of
these has five recording files. When you apply a configuration preset that has channels with index 1 and 2
only, you'll notice those channels each still have the same 5 recording files.
Channel
with index 3 is no longer
present, but the files are not lost!
Overwritten channel files are still available. To access and download/delete these recorded files, enter the
following into the address bar:
http://<deviceIP>/admin/channelN/archive
or
http://<deviceIP>/admin/recorderN/archive
, where N is the index of the removed channel/recorder.
For example, if a
Channel
with index 3 is no longer present, its corresponding files can be accessed by
entering the following into the address bar:
http://192.168.0.183/admin/channel3/archive
If you now create a new channel with index 3 (or load a preset that contains a channel with index 3), you'll find
it starts with five recorded files in the
Recordings
section. These are the same recorded files that existed at
the start of this example.
Furthermore, if you delete any of the recordings, you are deleting the
only
instance of those files. Using our
previous example, if you delete one of the five recordings from channel index 1, you'll find that even after
applying different presets channel 1 will have only four recorded files.
Deleting channels and recorders
Recorded files are stored on the system based on their channel or recorder number. All files saved for channel
index 1 are in one folder, and all files for recorder index 2 are in another. When you
delete
a channel (or
recorder), you permanently delete all recordings for that channel (or recorder) even if those recordings were
made while a different preset is applied.
Applying a configuration preset with a different set of channels or recorders is
not
the same as
deleting a channel.
170
Содержание Pearl-2
