Conair HTC 120, Руководство пользователя

Страница: 249 / 330

4
O
p
er
at
io
n
O p e r a t i o n l
4-107
Using the OptiMizer™
(continued)
2
System Running, Temperatures below setpoints, material usage:
In this case, the system will skip over all of the Pre-dry steps and go into the
Dynamic Delay step and through the OptiMizer™ functions as described
above. Since the temperatures were not above the setpoints, using the
OptiMizer™ in this fashion will probably result in poor performance and is
not recommended.
3
System Running, Temperatures above setpoints, no material usage:
The system will skip over the Pre-dry steps and go into the Dynamic Delay
step immediately as the Machine Run signal is satisfied. Then the system pro-
ceeds through the OptiMizer™ function as described above.
4
System Running, Temperatures above setpoints, material usage:
The system will skip over the Pre-dry steps and go into the Dynamic Delay
step and proceed through the OptiMizer™ function as described above.