Xerox WorkCentre 5790 Series, Service Manual

Page: 644 / 1610

May 2013
2-612 Xerox® WorkCentre® 5790 Family
OF4a
Status Indicator RAPs
Table 9 10-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
10-505 The fuser is warming up.
Printing may be delayed Fuser not at temperature Perform 10-322, 10-
324, 10-325, 10-330,
10-370
RAP
10-507 Open front door Sheet is near the IOT exit sen-
sor in the non-invert path Jam clearance or per-
form
10-120, 10-121,
10-126
10-508 Open front door Sheet is near the IOT exit sen-
sor in the left hand side of the
invert path Jam clearance or per-
form
10-120, 10-121,
10-126
10-509 Open front door Sheet is near the IOT exit sen-
sor in the right hand side of the
invert path Jam clearance or per-
form
10-120, 10-121,
10-126
10-510 Clear jam in IOT zone 4 Post fuser sensor detects
paper in post fuser area on
power-on or in standby Perform 10-107, 10-
108, 10-109, 10-110
RAP
10-511 Open front door Sheet near post fuser sensor Jam clearance or per-
form
10-107, 10-108,
10-109, 10-110 RAP
10-512 Open front door IOT exit sensor paper in IOT
exit area at power -on or start
print Jam clearance. Per-
form
10-120, 10-121,
10-126 RAP
10-513 Open front door Sheet near IOT exit sensor Jam clearance. Per-
form
10-120, 10-121,
10-126 RAP
10-516 Output tray nearly full Printer bin 0 90% full sensor
made Unload the tray
10-520 Replace fuser module Fuser counter reaches 300 k
prints Install new fuser mod-
ule,
PL 10.10 Item 1 ,
PL 10.8 Item 1 . Refer
to GP 27 , End of Life
Extension
10-521 Re-order but do not
replace fuser module Fuser counter reaches 290 k
prints Refer to the 03D Soft-
ware Module Failure
RAP before ordering a
new fuser module,
PL
10.10 Item 1 , PL 10.8
Item 1 .
10-523 Replace fuser module IOT detects fuser failure Install new fuser mod-
ule,
PL 10.10 Item 1 ,
PL 10.8 Item 1 .
10-530 The fuser module is not
compatible with this
machine. Please refer to
the user guide The system setting does not
match the fuser type setting
(service offering) Install new fuser mod-
ule or modify settings
10-531 Incompatible fuser module The system setting does not
match the fuser type setting
(fuser voltage)
Install a new fuser or
modify settings
10-532 Incompatible fuser module The system setting does not
match the fuser OpCo ID set-
ting (Market region)
Install a new fuser or
modify OpCo ID set-
ting
10-533 Incompatible fuser module The system setting does not
match the fuser product speed
setting
Install a new fuser or
modify the product
speed setting
10-540 Please wait adjusting
fuser temperature Fuser temperature control fail-
ure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370
RAP, 10-315,
10-320, 10-321, 10-
323, 10-340, 10-350,
10-360, 10-365, 10-
380
RAP
10-545 Fuser module under tem-
perature fault. Printing is
unavailable. If fault per-
sists, call for assistance.
Touch Ignore Error to use
other services Fuser warm-up failure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370
RAP
10-550 Fuser module temperature
fault. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services Hardware detected fuser fail-
ure. Perform 10-315, 10-
320, 10-321, 10-323,
10-340, 10-350, 10-
360, 10-365, 10-380
RAP
10-555 Fuser module control fail-
ure. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services Fuser control software failure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370
RAP
10-570 Replace fuser module FRU CRUM authorization fail-
ure. Status active when fault
10-399 raised Perform 10-399 RAP
10-571 Clear the jam in Areas 3,4.
Close the front door when
the paper has been
removed Paper detected in inverter area
on power up or in standby Perform 10-132, 10-
133, 10-134 and 10-
107, 10-108, 10-109,
10-110
10-572 Clear the jam in Areas 3,4.
Close the front door when
the paper has been
removed Paper detected near the
inverter sensor on power up or
in standby Perform 10-132, 10-
133, 10-134 and 10-
107, 10-108, 10-109,
10-110
Table 9 10-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action