Xerox WorkCentre 5790 Series, Service Manual

Page: 1486 / 1610

May 2013
6-102 Xerox® WorkCentre® 5790 Family
dC131a, dC131b
General Procedures/Information
dC131b NVM Tables Chain 12 to 19
General
1. Refer to the tables that follow for NVM parameters chain 12 to 28:
• NVM chain 12 Table 1
• NVM chain 14 Table 2
• NVM chain 15 Table 3
• NVM chain 17 Table 4
• NVM chain 19 Table 5
10-361 Labels Offset (2) Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius. 0 to 30 35-55 ppm
=15,
65-90 ppm
=10
10-364 Transp_cy Delay
(2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 0
10-365 CardStock Delay
(2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-366 Envelopes Delay
(2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-367 Labels Delay (2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-368 Tab Stock Delay
(2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-370 Cold Roll offset (2) Fuser cold roll offset profile. 0 to 11 35 ppm=1
40-55 ppm =6
65-90 ppm =8
10-371 Rough Stock Off-
set (2) Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius. 0 to 30 15
10-372 Rough Stock
Delay (2) Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-423 Fsr Range (2) Temperature range below
standby in which start print
can begin. 10 to 30 deg C 35 ppm = 30
40-55 ppm =
10
65-90 ppm =
28
10-426 Web Advance
Group (2) Web advance group banding
select. 1=group 1
2=group 2
3=group 3 2
Table 9 NVM chain 10
Location NVM Name NVM Description Value Default
Table 1 NVM chain 12
Location NVM Name NVM Description Value Default
12-001 Finisher Module
Type Defines finisher module
types 65=OCT
110=LCSS2K
120=LCSS1K
176=HVFBM
100=No Fin-
isher 100
12-002 OCTFullFilter OCT 90% full filter 0 to 5000 ms 35 ppm=4000
40-90 ppm
=2500
12-003 BookMkrCompile-
Offset Used to adjust the compiler
position of the booklet
maker back stop. 0 to 200
0.1137mm/step 100
12-004 BookMkrStapleOff-
set Used to align the staple to
the fold. 0 to 200
0.1137mm/step 100
12-005 BookMkrFold Off-
set Used to centre the fold and
the staple relative to the
lead edge. 0 to 200
0.1137mm/step 100
12-006 BookMkrTampRdy-
Offset Used to adjust the booklet
maker tamping ready posi-
tion. 0 to 200
0.265mm/step 100
12-009 BookMkrTriFoldC-
Fold Used to position upper tri-
fold. Moves fold relative to
lead edge on C Fold. 60 to 140
0.1137mm/step 100
12-010 BookMkrTriFoldZ-
Fold Used to position lower tri-
fold. Moves fold relative to
lead edge on Z Fold. 60 to 140
0.1137mm/step 100
12-011 BookMkrTriFold-
Deskew Used to adjust the amount
of de-skew for the 2nd fold
in a tri-fold by varying the
amount of buckle length in
registration for the paper
entering TF. 90 to 110 100