manualshive.com logo in svg

Xerox WorkCentre 5790 Series, Service Manual

The Xerox WorkCentre 5790 Series is a high-performance multifunction printer designed to meet the demands of busy offices. For easy troubleshooting and maintenance, users can access the comprehensive Service Manual. Download this manual for free from our website manualshive.com and optimize the functionality of your WorkCentre 5790 Series effortlessly.

Share
Download
background image

May 2013

6-69

Xerox® WorkCentre® 5790 Family

GP 40

General Procedures/Information

NC

Normal Contrast. Copy contrast setting

NCP

Network Core Protocol

NCR

No Copying Required

NCU 

Network Control Unit

NDS 

NetWare Domain Services or Novell Directory Services

NDS Context

NetWare Domain Services Context

NDS Tree

NetWare Domain Services Tree

NetBEUI

NetBIOS Extended User Interface. A network device driver or transport 
protocol that is the transport driver supplied with LAN Manager. It can 
bind with as many as eight media access control drivers.

NetBIOS

Network Basic Input / Output System. Software developed by IBM that 
provides the interface between the PC operating system, the I?O bus, 
and the network. Since its design, NetBIOS has become a de facto stan-
dard.

NGI

Next Generation Infrastructure (new files and mail servers)

NIC

Network Interface Card. Converts the data to a form suitable for trans-
mission and reception. Uses ARP and RARP.

Nm

Newton metre

NOHAD

Noise, Ozone, Heat, Airflow and Dust

NP

Printer configuration

NS

Normal Sharpness. Copy sharpness setting

NSC 

Non-Standard Facilities Command

NSF 

Non-Standard Facilities 

NSS 

Non-Standard Set-Up

NSSD

Network. The SESS and CentreWare development team based in Roch-
ester NY. This group is now named CDDU.

NVM

Non-Volatile Memory

OA

Open Architecture

OB or O/B

Out Board

OCT

Offsetting Catch Tray

OEM

Original Equipment Manufacturer

OGM

On Going Maintenance

OOP

Out Of Paper

OpCo

Operating Company

OSA

Online support Assistant

OSCG

Office Systems Component Group

P/R

Photoreceptor

PABX 

Private Automatic Branch Exchange

PC 

Personal Computer

PC Fax

Personal Computer Fax

PCI

Peripheral Component Interface

PCI

Personal Computer Interface

Table 1 Abbreviations

Term

Description

PCL

Printer Control Language

PCMCIA

Personal Computer Memory Card International Association

PD 

Process Direction

PDF

Adobe Acrobat Portable Document Format

PDL

Page Description Language

PDT

Product Delivery Team

Pels 

Picture Data (Pixel)

PFM

Paper Feed Module

PFP

Paper Feed Platform

PHI

per Hundred Installs

PIN 

Procedural Interrupt Negative

PIN 

Personal Identification Number

ping

Packet InterNet Groper. Tool to test connections between nodes by send-
ing and returning test data.

PIP 

Procedural Interrupt Positive

PJL

Printed Job Language. Hewlett Packard page description language.

PMC

Programme Management Committee

POPO

Power Off Power On

POO or P of O

Principles of Operation

POST

Power On Self Test

PPC

Power PC. A EPROM manufacturer

PPD

Postscript Printer Description. A PPD file is a simple formatted text file 
that contains a description of the printers features and the corresponding 
PostScript ‘code’ needed to activate each feature. Apple LaserWrite driv-
ers and application programs such as Adobe PageMaker can use PPD 
files. With a OOD file, many of the printing features of a network printer 
can be made available to users. However advanced features such as 
LAN Fax, Accounting and Exception Page Programming cannot be pro-
vided.

PPD Minidrivers

PPD minidrivers are available in Windows operating systems (from Win-
dows 95 onwards). With these, a Xerox - supplied PPD file is used in 
conjunction with an operating system supplied driver ton create a Post-
Script driver tailored for a specific device. In windows 95/98, a driver pro-
vided by this method has lamentations and not all devices features can 
be made available to the user. With Windows NT 4 and Windows 2000, it 
is possible to make more features available by using a user interface ren-
dering plug - in. In this document, if the driver is to be provided with If no 
plug-ins are provided, then it is called a standard minidriver.

PPHI

Problems Per Hundred Installs

PPI

Post Process Inserter

PPM

Prints per minute / Parts Per Million

PPR 

Partial page Request

pps

Partial Page Signal / pulses per second

Table 1 Abbreviations

Term

Description

Summary of Contents for WorkCentre 5790 Series











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WorkCentre 5790 Series

Xerox All in One Printer Product Safety Data Sheet preview
All in One Printer
Brand: Xerox Pages: 3
Xerox DocuColor 1632 Printing User Manual preview
DocuColor 1632
Brand: Xerox Pages: 130
Xerox Phaser 6500 Service Manual preview
Phaser 6500
Brand: Xerox Pages: 793
Xerox 4150S - WorkCentre B/W Laser Brochure & Specs preview
4150S - WorkCentre B/W Laser
Brand: Xerox Pages: 4
Durst Rho 600 Pictor Specifications preview
Rho 600 Pictor
Brand: Durst Pages: 2
Oce cm2522 User Manual preview
cm2522
Brand: Oce Pages: 222
Ravas PR-INT-MX-RAVAS-ABLE Manual preview
PR-INT-MX-RAVAS-ABLE
Brand: Ravas Pages: 26
Ultra electronics Magicard Opera 100 Quick Start Manual preview
Magicard Opera 100
Brand: Ultra electronics Pages: 2
Xerox 8254E User Manual preview
8254E
Brand: Xerox Pages: 244
Olivetti d-Color MF1600 Service Manual preview
d-Color MF1600
Brand: Olivetti Pages: 204
Oki C7400 Maintenance Manual preview
C7400
Brand: Oki Pages: 174
SIGN RACER 1600 LED Operation Manual preview
1600 LED
Brand: SIGN RACER Pages: 73
Oki Microline 182 Handbook preview
Microline 182
Brand: Oki Pages: 175
Xante Impressia Quick Installation Manual preview
Impressia
Brand: Xante Pages: 3
Toshiba B-EP2D Series Owner'S Manual preview
B-EP2D Series
Brand: Toshiba Pages: 28
Toshiba B-880-QQ SERIES Owner'S Manual preview
B-880-QQ SERIES
Brand: Toshiba Pages: 34
Utax 3508ci Quick Manual preview
3508ci
Brand: Utax Pages: 4
Monarch 9860 Specifications preview
9860
Brand: Monarch Pages: 2

Brands by name

Popular brands

Load more brands