Xerox WorkCentre 5790 Series, Service Manual

Page: 642 / 1610

May 2013
2-610 Xerox® WorkCentre® 5790 Family
OF4a
Status Indicator RAPs
07-590 Replace tray 5 feed rolls The feed head counter has
reached the end of life figure Install new tray 5 feed
rolls,
PL 8.45 Item 2
07-592 Check the settings for tray Tray 2 closed or size change
from power-on
Confirm the attributes
or open the tray
Table 7 08-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
08-548 Clear jam from right hand
side of Tray 5 Sheet did not clear the wait
sensor within the expected
time Perform 08-115, 08-
117 RAP
08-550 Open left hand door Sheet over wait sensor Jam clearance. Per-
form
08-100 RAP
08-551 Open left hand door Tray 1 feed sensor detects
paper in feed area on power-
on or in standby, 08-101 Jam clearance. Per-
form
08-101 RAP
08-552 Open left hand door Tray 2 feed sensor detects
paper in feed area on power-
on or in standby. 08-102 Jam clearance. Per-
form
08-102 RAP
08-553 Open tray 3 Tray 3 feed sensor detects
paper in feed area on power-
on or in standby. 08-103 Jam clearance. Per-
form
08-103, 08-113
RAP. If the fault
remains, check the
tray 3 exit sensor, refer
to the
08-131 RAP.
08-554 Open left hand door Tray 4 feed sensor detects
paper in feed area on power-
on or in standby. 08-104 Jam clearance. Per-
form
08-104, 08-114
RAP
08-555 Open front door Registration sensor detects
paper in registration area on
power-on or in standby. 08-150 Jam clearance. Per-
form
08-150, 08-151
RAP
08-556 Open front door Paper in duplex path at power-
on or in standby Jam clearance. Per-
form
08-160, 08-161
RAP
08-557 Open left hand door Paper over the registration
sensor when feeding from the
bypass tray Jam clearance. Per-
form
08-155, 08-156
RAP
08-558 Clear jam in Tray 5 Sheet over the feed sensor Jam clearance. Per-
form
08-115, 08-117
RAP
08-561 Open tray 1 Sheet near Tray 1 feed sensor.
08-106 Jam clearance. Per-
form
08-106 RAP
08-562 Open tray 2 Sheet near Tray 2 feed sensor Jam clearance. Per-
form 08-106 RAP
Table 6 07-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
08-563 Open tray 3 Sheet near Tray 3 feed sensor Jam clearance. W/O
TAG 151 Perform 08-
107 RAP. W/ TAG 151
Perform 08-131 RAP,
check the tray 3 exit
sensor
08-564 Open tray 4 Sheet near Tray 4 feed sensor Jam clearance. Per-
form 08-108A RAP
08-565 Open left hand door Sheet near registration sensor Jam clearance Per-
form 08-150, 08-151
RAP
08-566 Open front door Sheet near duplex sensor Jam clearance. Per-
form
08-160, 08-161
RAP
08-567 Open left hand door Paper over the registration
sensor when feeding from the
bypass tray Jam clearance. Per-
form
08-155, 08-156
RAP
08-568 Clear jam in Tray 5 Paper did not reach the tray 5
feed sensor in time Clear jam or perform
08-115, 08-117 RAP
08-570 Post jam clearance initial
is at ion in progress The IOT and finisher device
are performing the post jam
clearance initialization pro-
cess to check for stray sheets Status clears on com-
pletion of initialization
process
08-580 Paper jam not fully cleared A stray sheet has been
detected in either the IOT or
finisher device during the post
jam clearance initialization rou-
tine. 08-190
Jam clearance. Per-
form
08-190 RAP
08-590 An unexpected time-out
was detected for a sheet in
the paper path. This may
be due to a different paper
in the trays than the
machine expects. Please
check and confirm the con-
tents of the paper trays Unexpected event or time-out
for sheet. 08-171, 08-181, 08-
182 Perform 08-171 RAP,
08-181 RAP, 08-182
RAP
Table 8 09-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
09-540 Xerographic Module
cleaning in progress.
Please wait The Scorotron cleaning is in
progress Refer to 09-341, 09-
342 Scorotron Clean-
ing Failure RAP
Table 7 08-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action