Xerox WorkCentre 5790 Series, Service Manual

Page: 1483 / 1610

May 2013
6-99 Xerox® WorkCentre® 5790 Family
dC131a
General Procedures/Information
10-051 281-300 mm offset Offset temperature required
on thermistor B for paper
width. Unsigned number in
NVM table (displayed on
GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius
0 to 20 10
10-053 80 gms Offset Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius 0 to 30 10
10-058 Transparency Off-
set Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius 0 to 30 35-55 ppm
=10,
65-90 ppm=0
10-059 Card stock offset Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius 0 to 25 15
10-060 Envelopes Offset Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius 0 to 30 15
Table 9 NVM chain 10
Location NVM Name NVM Description Value Default
10-061 Labels Offset Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius 0 to 30 15
10-063 Total Fsr Web
Count Total fuser web count. Cycles 0
10-064 Transparency
delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 0
10-065 Cardstock delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-066 Envelopes delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-067 Labels delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-068 Tab stock delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-069 Cold Start Offset Fuser cold start offset profile. 0 to 3 35-55 ppm=0
65-90 ppm =2
10-070 Cold Roll Offset Fuser cold roll offset profile. 0 to 11 35 ppm=1
40-55 ppm =6
65-90 ppm =8
10-071 Rough Stock Off-
set Media type offset for fuser roll
temperature. Unsigned num-
ber in NVM table (displayed
on GUI) to be converted to
signed number. by subtrac-
tion of 10 from table value.
i.e. 8 displayed in NVM is
equivalent to -2 degrees Cel-
sius. 0 to 25 15
10-072 Rough Stock
Delay Media type time delay for
fuser roll temperature. 0 to 8 seconds 4
10-074 Rough Stk FRU
Enable Rough Stock Fuser (TOS) Disable = 0
Enable = 1 0
10-075 Type 256 FRU
Enable Type 256 Fuser Disable = 0
Enable = 1 1
10-102 Te PFs Toinv Mot
Off Dup Inverter motor off stop posi-
tion (simplex). 0 to 800 ms 35 ppm=530
40-55 ppm
=360,
65-90 ppm =0
Table 9 NVM chain 10
Location NVM Name NVM Description Value Default