430
SKYROS Corporation VideoNet 8.4 User guide
You can add an unlimited number of
segments
into your
building
. To do that,
select
building name
in the tree, click
Segment
button on the toolbar and go
through the steps of the previous algorithm.
During setup you can handle segment scheme as follows: move, rotate and scale
it. During that, you can save such changes as segment
views
.
To move segment scheme:
1. Roll mouse cursor over
segment
scheme.
2. Click left mouse button and, holding it down, move the scheme in a necessary
place on the demonstrational display.
To rotate segment scheme:
1. Select necessary
segment
in the tree.
2. Clicking
Left
and
Right
buttons on the toolbar, rotate the scheme.
To edit segment scheme scale:
1. Select needed
segment
in the tree.
2. Clicking
Zoom In
and
Zoom Out
buttons on the toolbar, edit scheme scale.
To save configured segment scheme View:
1. After finishing scheme rotation, position and scale editing select this
segment
in the tree.
2. Click arrow-button near
Object
button on the toolbar. Select
View
item from
the drop-down list.
3.
View properties
page opens. Enter
Name
of the
view
, you are saving.
4. Click
OK
. The saved
view
will appear in the tree in
Views
folder.
You can arrange the following
objects
on a graphic plan segment scheme:
• perimeter security devices – SMI Intrepid PSS;
• sensors, connected to perimeter device;
• and also cameras, microphones, sensors, relay outputs and presets (refer to
3.11.1.1
section)
according to their positions in the guarded
building
.
To add an object to a plan segment:
1. Select a
segment
in the tree on the
Plans construction
tab.
2. Click
Object
button.
Select
window opens. Select network computer, to which
perimeter devices
are connected, select necessary devices from the list
