Skyros VideoNet User Manual Download Page 312

Page: 312 / 463

311

SKYROS Corporation VideoNet 8.4 User guide

Playback controlling buttons (7)

Description

Clicking the

Play

button switches video/audio information

playback from the position, on which the player cursor

is placed. After clicking the button transforms to

Pause

state.
Clicking the

Pause

button stops playback and transforms

the button to

Play

state.

Clicking and holding the

Rewind

button switches

accelerated/slowed playback at the speed, specified in
the rewind speed selection field

. Rewind

is going on until the button release.

To accelerate playback select 2

, 4

, 8

, 12

, 18

, 24

speed, to slow playback select 1/2

or 1/8

speed.

If during

rewind

the mode of working in

active interval

is switched on, then rewind will be performed inside this

active time interval.
Clicking this button stops rewind and playback (switches

pause

mode) and performs going one frame back/

forward for all sources.

If the mode of working in

active interval

is switched on in

the player, then going to next/previous frame will be

performed inside this active interval.
Clicking this button stops rewind (doesn’t stop playback)

and performs going one record fragment back/forward

by all sources. Clicking this button during playback

causes going to to next/previous record fragment, at

that playback continues from this fragment.

If the mode of working in

active interval

is switched on in

the player, then going to next/previous fragment will be

performed inside this active interval.

Button

Name

Play

Pause

Rewind back/

forward

Previous/next

frame on the

track

Previous/next

record fragment

on the track

2. Set exact

date and time

using up/down buttons of your keyboard (or enter

necessary date and time).
The red

cursor

will automatically move to the indicated position on the

track

Also you can click

button, which opens

Positioning

window, in which you

can set date and time, to move the cursor to.

Summary of Contents for VideoNet
















































































































































































































































































































































































































































































Search results

Summary of Contents for VideoNet

Reviews:

Brands by name

Popular brands

Skyros VideoNet, User Manual

Search results

Summary of Contents for VideoNet

Reviews:

Brands by name

Popular brands