241
SKYROS Corporation VideoNet 8.4 User guide
• Pause
You can add this
reaction
type to system
task
, if you want the system to make
pauses between reactions activations. This reaction activation causes stopping
activation of subsequent reactions of a current task during the time, specified in
the reaction parameters. You can use this reaction, for example, in the following
cases:
• for delaying of system arming activation (
“Arming”
and
“Change arming state”
reactions), thereby delaying activation of subsequent reactions of a current task.
It’s convenient in case you need time to leave guarded object after having armed
the system.
Option
Source
Preset
Zone number
Output objects
number
to
Event Log
Null
objects
counter
Description
Select from the drop-down list a
camera-detector
, results of objects
counting by which must be displayed in response to event occurence.
Select a
preset
by camera-detector, according to parameters of which
you want to count objects, from the drop-down list.
Select a zone number, in which objects were counted.
In this case the system will count objects in the specified zone according
to configured detection parameters.
You can also select
Sum of all zones
item. In this case the system will
output a sum of values from all zones of this objects counter, received
from all zones of the objects counter.
Or you can select
All zones
item. In this case the system will output
objects number, counted by every zone of this objects counter.
Select this option, if you want the system to register amount of counted
objects in the Event Log.
Select this option, if you want the system to null the value of objects
amount.
Attention!
Objects counter nulling is performed after registration of
objects amount in the Event Log.
Open reaction
Properties
dialogue box (see the
steps 1-3
of the algorithm of
3.7.2.8
section).
