287
SKYROS Corporation VideoNet 8.4 User guide
6. Click
Add
button on the
Matrix
page toolbar of the
master computer
.
Select
dialogue box appears. Open
Network
folder and select
slave
computers in
the list opened. Click
OK
. Add computers will appear in the
list of slave
computers
on
Matrix
page of the
master
computer. Check-boxes near
computers names will be automatically selected by the system. Click
Apply
button on the
master
computer.
3.10.2. Authorization and controlling network matrix monitors
5.
Matrix
configuration page opens.
After
network matrix
parameters configuring it is necessary to authorize it.
To authorize network matrix:
1. Log off all the
slave
computers.
To do that, go to
Control->Log off
menu successively on each of them (if your
computer is in
configuration setup mode
), or press
Exit/Log off
button (if your
computer is in
surveillance mode
).
2. If at the moment
master
computer is in
“Log On”
state (that is, if
VideoNet
system is launched on it), then the system will automatically authorize all
slave
computers of the
network matrix
.
VideoNet
will log on the system on
all
slave
computers as
NMClient
.
To provide correct
network matrix
authorization each
slave
computer must
be in
“Log Off”
state.
