418
SKYROS Corporation VideoNet 8.4 User guide
Integration of
VideoNet
system
with
Intrepid™ MicroPoint
Cable
system enables to control
perimeter devices directly from
plans window of
VideoNet
system, and completely to
automatize monitoring of
guarded object
state (territory,
building, factory, etc.) due to:
• possibility of loading
.smp-file
,
containing information about
connection of perimeter
devices, adding perimeter
devices to system configuration and subsequent configuring their parameters
(according to configuration and connection of devices in the
Intrepid™
system);
• possibility of loading graphic schemes of guarded object (territory, buildings,
etc.) – files in .dwg format, and arranging perimeter
segments
and perimeter
sensors
on plans along with
cameras
,
microphones
,
relay outputs sensors
and
alarm sensors
. During configuring you can arrange all
perimeter devices
on a
graphic plan in exactly the same way as they are arranged at your object for the
purpose of system controlling convenience.
• possibility of controlling perimeter devices from graphic plans window: you can
arm/disarm perimeter
segments
and
sensors
, receive information about state
of perimeter
devices
(alarm by segment, alarm by sensor, sabotage, segment
cable breakdown, breaking of PM, LU, TU modules, etc.);
• possibility of configuring
VideoNet
system
schedule
so that in response to events
in
Intrepid™
system
VideoNet
system can perform a number of pre-defined
actions. For example, in case of alarm by sensor to start recording by definite
camera or microphone and to produce sound signal (or any other actions);
• possibility of sending notifications about occurred alarms at guarded object,
using
message service
of
VideoNet
system and analysis of events, occurred in
the system, using
Event Log
of
VideoNet
system.
