SKYROS Corporation VideoNet 8.4 User guide
290
VideoNet
introduces an entirely new functionality –
graphic plans
. This allows:
• to load
graphic plans
of guarded objects into the system in vector format
(CAD-formats);
• to move, to rotate and to scale
graphic plans
arbitrary both during configuration
and during working with the system;
• to arrange devices both of local and remote configuration at the map (cameras,
microphones, sensors and relay outputs controllers);
• to set up
views
of guarded object, assigning the most convenient scale and
position for separate pars of a plan;
• to perform integrated surveillance of the situation on guarded territory: the
system informs an operator with the help of corresponding indication on the
plan about alarm and state of devices, placed along the perimeter of guarded
object (motion detection, sound detection, sound translation from microphone,
alarm sensor response, loss of signal by camera and etc.).
• to perform alarm switching from guarded object plan to translation by alarm
camera;
• to switch from object plan to needed object
view
.
• to perform integrated control of devices, placed on the plan.
Graphic plans
of objects enable you to perform surveillance both along the
perimeter of guarded object, and at its separate parts.
VideoNet
system gives
wide scope for
plans
configuring – you can dispose all devices according to their
arrangement on your object and configure
views
of these plans, which are
necessary for your work.
During that, the system will inform you about events occurred: motion, detected by
camera, loss of video signal, loss connection with camera, start of sound translation
from microphone. Besides, you can start emergency video recording from selected
camera, switch sound translation from a microphone, “arm” a camera.
3.11.
G
RAPHIC PLANS
