253
SKYROS Corporation VideoNet 8.4 User guide
For example for user “Administrator (J.Smith)”, under which “Computer 1” log-on
is performed, to be able to add “Computer 2” to his configuration, the following
conditions must be met. User “Administrator (J.Smith)” must be added to the list
of users and groups of the
Remote computer adding
policy at the “Computer 2”.
Otherwise, access will be denied for user “Administrator (J.Smith)” in his attempting
to add “Computer 2” to system configuration of either “Computer 1” or any other
network computer, at which log-on under this user is performed.
For more information about configuring policies and access rights refer to
corresponding sections of
3.6
chapter.
3.8.2.1. Adding computers
To add new computer to the system:
1. Make sure that user, under which system log-on is performed on your computer,
has right to add the remote computer, which you are going to add.
2. Switch to
configuration
setup mode.
3. Select
Computer->Add
item in the main menu.
4.
Add new computer wizard
opens. Click
N
EXT
to continue.
3.8.2. Working with computers
All the actions with
remote
computers are performed in the main system menu.
For successful adding of a remote computer to system configuration it is necessary,
that the user, under which log-on on your computer is performed, has right to add
this remote computer.
To do that, the user must be in the list of users and groups of the
Remote computer
adding
policy at the computer, which is being added.
