180
SKYROS Corporation VideoNet 8.4 User guide
4. Configure
“continuous”
record type. Since this record will be started by “Time
interval” event occurrence (schedule will be configured a little later), assign
“continuous” record type to this event (on the
Record types
tab). Refer to
3.5.2.13
section.
Since by default blue colour is assigned to
continuous
record type
, this record will
be marked with blue colour in the
Player
. If necessary, you can change colour for
this record type, refer to
3.5.2.12
section.
Configuring:
1. Add
“Volume for recording of camera 1 and microphone 1”
and
“Volume for
recording of cameras 2, 3 and
microphones 2, 3”
volumes to system
configuration
(refer to
3.5.2.1
section)
.
2. Add recording function:
“Recording
by Camera 1 and Microphone 1”
to system configuration. Add
“Camera 1”
and
“Microphone 1”
as sources to it and specify recording parameters for each source.
Specify
“Volume for recording of camera 1 and microphone 1”
as volume for
recording function. Information from these sources will be saved to this volume.
3. Add recording function:
“Recording by Cameras 2-3 and Microphones 2-3”
to
system configuration. Add
“Camera 2”
,
“Camera 3”
,
“Microphone 2”
and
“Microphone
3”
as sources to it and specify recording parameters for each source. Specify
“Volume for recording of cameras 2,3 and microphones 2,3”
as volume for recording
function. Information from these sources will be saved to this volume.
Attention!
Cameras and Microphones must be previously added to system
configuration, otherwise you won’t be able to configure recording function
correctly.
3.5.3. Examples of working with Recording panel
“Configuring parameters for continuous recording by cameras and microphones”
It is necessary:
A. To perform continuous recording by
“Camera 1”
,
“Camera 2”
,
“Camera 3”
and
“Microphone 1”, “Microphone 2”, “Microphone 3”.
B. This records must be of
“continuous”
type.
C. The records must be stored in the archive in the following way:
• from
“Camera 1”
and
“Microphone 1”
to
“Volume for recording of camera 1 and
microphone 1”
;
• from
“Cameras 2, 3”
and
“Microphones 2, 3”
to
“Volume for recording of cameras
2, 3 and microphones 2, 3”
;
Example 1
[
for the picture 3.5.1-5
]
