119
SKYROS Corporation VideoNet 8.4 User guide
If, during configuring
presets
parameters, there occurred the loss of
connection with matrix switcher, and time of connection retrieving did not
exceed 20 seconds, user rights for camera controlling will be saved.
You can create as many presets as necessary (maximum possible number of
presets depends on device model). To do that, you should repeat
steps 1-9
of the
previous algorithm.
For more information about model and properties of the camera, you are using,
refer to the device manual.
3.4.2.2. Changing Pan Tilt presets parameters
To change name of created preset:
1. Select
preset
in the list of presets on the
Presets
tab.
2. Click
button on the toolbar..
3.
Preset
properties window opens.
4. Enter new
preset
name and click
OK
.
To change observation point (vector) of created preset:
1. Select
preset
in the list of presets on the
Presets
tab.
2. Using buttons of Pan Tilt control menu on the
demonstrational display
, set
up camera positioning as you need.
3.
button becomes available. Click
button to save
preset
parameters in a specified camera cell.
If, during
preset
parameters changing you want to cancel changes you have
made, press
Cancel
button. New parameters of the
preset
won’t be added
to system configuration and no information will be stored in camera cell.
Attention!
Changing parameters of created presets for Pan Tilt cameras
connected through matrix switcher is possible, only if there is a free control
channel in the matrix switcher and selected camera is free for controlling. For
more information refer to the previous section.
