408
SKYROS Corporation VideoNet 8.4 User guide
5. On the
Cameras
tab you should select cameras from the
Available cameras
list and add them into
the Cameras for surveillance
list. The
Available
cameras
list contains all local analog cameras, which are in the configuration.
Cameras for surveillance
list contains cameras, which will be used for
surveillance by ATM. To add camera into the
Cameras for surveillance
list,
select it in the
Available cameras
list and click
button. The camera will
be moved into the
Cameras for surveillance
list. You can add
not more than
two cameras
into the
Cameras for surveillance
list. To remove camera from
the
Cameras for surveillance
list, select it by left mouse button and click
button.
6. On the
Parameters
tab you should specify
TCP/IP port number
, by which the
systems interact. By default port nubmer is
3000
.
Software of some ATMs enables to form event about cash disbursement. If
you want
ATM Inlan
external system to
form
dummy
event of cash
disbursement
, select corresponding check-box in
Additional settings
group-
box.
Enter
delay in forming dummy event of cash disbursement
in seconds. This
is the time period, which must pass after transaction before forming dummy
event of cash disbursement. By default, delay is
0 seconds
.
To do that, you should select
C
OMPUTER
->L
ICENSE
...
item in the
VideoNet
system
main menu.
To integrate VideoNet with Quest II:
1. Add
ATM Inlan
external system into
VideoNet
system configuration (refer to
6.2.1
section).
2. Go to
Network
configuration page and click
Properties
button on the toolbar.
3.
ATM Inlan
external system properties page opens. The page contains three
tabs:
General
,
Cameras
and
Parameters
.
4. On the
General
tab you can change the name, under which the external
system will appear in configuration.
