Skyros VideoNet User Manual Download Page 202

Page: 202 / 463

201

SKYROS Corporation VideoNet 8.4 User guide

3.6.2.6. Creating reports on access to devices

VideoNet

system enables to create reports on users access to devices.

Report

contains information about all the devices, added to system configuration, and

about all users permissions.

To create report:

1. Select

View ->Reports...

item in the menu on the

Devices

panel.

Reports

dialogue box opens.

3. Select the

report

type.

4. Select

Expand user group

check-box, if you want not only user groups, but all

the group members to be displayed in the report.

5. Click

6. Report will be made in html-format and opened by a standard web browser.

Then you will be able to process it, as you need.

Summary of Contents for VideoNet
















































































































































































































































































































































































































































































Search results

Summary of Contents for VideoNet

Reviews:

Brands by name

Popular brands

Skyros VideoNet, User Manual

Search results

Summary of Contents for VideoNet

Reviews:

Brands by name

Popular brands