154
SKYROS Corporation VideoNet 8.4 User guide
Set up new recording parameters, using the control elements of this dialog box:
Parameters
Image size
Sharpness
Sensitivity
Description
Use this control element to set up your own image size.
Use this control element to set sharpness parameter. The more sharpness
parameter is set, the higher sharpness of borders, but the more frame
size. The optimum value lies between 5 and 70 but it can change depending
on such parameters as lightening and motion.
Use this control element to set sensitivity level. VideoNet uses stream
algorithms of video image coding and stores the full information only about
basic frames. During other frames recording only the difference between
the current and the previous frame is stored. Only basic frames coding
doesn’t depend on previous frames. The more sensitivity parameter is
set, the more information is saved about temporary frames and thus the
image quality refines. The optimum sensitivity level is from 4 to 6.
Quality
1
2
3
4
5
6
7
8
9
10
Sensitivity
3
4
3
4
5
4
6
7
7
10
Resolution
256
х
192
384
х
288
768x288 / 720
х
288*
768x576 / 720
х
576*
Sharpness
5
7
5
6
8
6
8
9
7
10
Resolution values, marked with
*
, correspond to values for sources, connected to new
generation video capture cards.
Besides predefined
quality
presets you can define your own recording parameters
for a selected source, using additional control elements. To do that, click
In detail...
button to the right of the main control elements.
Detailed parameters DVPack
1.42
dialog box opens.:
• DVPack 2 camera selected as a source
If a
camera
, for compression video from which
DVPack 2
codec is used, is selected
as a source for recording, you will see the following control elements in
recording
parameters
field:
