21
SKYROS Corporation VideoNet 8.4 User guide
The
System Log On
window will appear every time you launch
VideoNet
system in case
Automatic Log On
option was not selected on the Security
tab of the
Access
panel (see
3.6.2.4
section).
Before starting work with the system it is necessary to set up its configuration
parameters (to do that, you should switch to
configuration setup mode
). If you
haven’t imported configuration during
VideoNet
installation, then system
configuration will be empty – contents of configuration window pages will be
empty. You can successively set up system configuration yourself according
to your requirements to it. You can also import any of standard configurations
and edit it, if necessary (see
3.9
section).
After completion of the
VideoNet Setup Wizard
work there appears a
System Log
On
window, where you should enter user name and password. When the first time
you should log in as
Administrator
and enter the password, which was specified
in the
VideoNet Setup Wizard
.
Enter
user name
and
password
in the corresponding fields and click
OK
to log in.
