159
SKYROS Corporation VideoNet 8.4 User guide
opens. Specify video and/or audio
recording parameters
for sources, you
have added at the previous step. For ordinary cameras, IP-cameras and IP-
server cameras you can specify
resolution
and video recording
quality
, and
also you can limit frame rate and select recording as black/white. For
microphones you can specify audio recording quality.
At adding several sources to recording function video recording parameters
should be configured separately for every IP-camera. For CCTV cameras
video recording parameters should be configured as follows:
• simutlaneously for all cameras, which are connected to cards with Bt8xx or
Cx2388
х
chips and which use DVPack 1.42 codec;
• simutlaneously for all cameras, which are connected to cards with Bt8xx or
Cx2388
х
chips and which use DVPack 2 codec;
• simutlaneously for all cameras, which are connected to new generation
cards and which use DVPack 1.42 codec;
• simutlaneously for all cameras, which are connected to new generation
cards and which use DVPack 2 codec.
In more detail configuring source recording parameters is described in
3.5.2.7
section. Click
Next
.
7.
Completing the Add Sources to Recording function
page opens.
8. Click
Finish
button to complete the wizard.
9. New added
sources
will appear in the list.
10. Click
Apply
button on the main toolbar.
One and the same source can be added to several
recording functions
.
Recording parameters of this
source
can be set up separately in each
function
.
Configuring
recording parameters
at simultaneous work of such
recording
functions
occurs according to “
maximum of record type priority” principle.
For
more information about the same
source
adding to several different
recording
functions
and system behaviour in case of simultaneous start of several
recording
tasks
for one
source
with different qualities is described in
3.5.2.14
section.
