33
SKYROS Corporation VideoNet 8.4 User guide
• Automatic device adding
In case you select
automatic device search
, the system tries to detect new installed
devices and to identify these devices itself. Then the system suggests user to
select from the detected device the one, which should be added in the system
configuration.
Automatic
search is available only for local computer configuration.
5. Select device from the list and click
N
EXT
.
By
automatic search
only audio/video capture devices can be detected. In case
all devices, which can be detected by the system, are added, the system displays
a message. This message informs that it is impossible to find any new device
and suggests to proceed to
manual
device selection.
If you install devices on a remote computer, only
manual device selection
is available in the Add device wizard.
6. When this step the system invites you to specify device
name
and (if necessary)
