160
SKYROS Corporation VideoNet 8.4 User guide
Adding, configuring pre-recording function parameters, adding sources, removing
pre-recording functions and their sources is similar to
recording functions
,
described in
3.5.2.6
–
3.5.2.10
sections.
At sources recording parameters configuring for
pre-recording functions
it is
necessary to specify records
storage time
. As it is said above, for
pre-recording
the system
uses computer virtual memory.
3.5.2.9. Removing sources from recording function
To remove source from a recording function:
1. Open
Recording functions
tab on the
Recording
panel.
2. Select function in list of
recording functions
, from which you want to remove
a
source
.
3. Select in the
function parameters
field the
source
, which you want to remove.
• You can remove several sources from
recording function
simultaneously
by selecting them with left mouse button and holding
C
TRL
or
S
CHIFT
.
4. Click
Remove
button on the toolbar.
• Or click
D
EL
on your keyboard.
5. Click
Yes
in the opened dialogue box to confirm removing of the selected
source.
3.5.2.10. Removing recording function
To remove recording function:
1. Open
Recording function
tab on the
Recording
panel.
2. Select
recording function
, which you want to remove.
• You can remove if necessary several
recording functions
simultaneously,
by selecting them with left mouse button and holding
C
TRL
or
S
CHIFT
.
3. Click
Remove
button.
• Or click
D
EL
on your keyboard.
4. Click
Yes
in the opened dialogue box to confirm removing of the selected
recording function
.
3.5.2.11. Adding and configuring pre-recording function parameters
Parameters
Storage time (sec)
Description
Specify
time
, during which the system should store record by
the source. This parameter is set separately for each source.
Saving of stored information to hard disc occurs, only if the system activates
ordinary recording. For example, system schedule can be “programmed” so that
the alarm event activating starts recording by one or several cameras. At this
moment the system saves “pre-alarm recording” for these camaras (see picture
3.5.1-9).
Combining pre-recording and ordinary recording reactions, you can set up system
schedule for solving practically any task – pre-recording can be used not only as
