English(original instructions)
EN
FR
DE
ES
IT
PT
NL
SV
DA
NO
FI
HU
CS
RU
RO
PL
SL
HR
ET
LT
LV
SK
BG
02/",%-
0/33)",%#!53%
3/,54)/.
Bar and chain running hot
Chain lubricant tank empty.
Lubricant tank should be filled every time fuel tank
and smoking.
is filled.
Chain tension is too tight.
Tension chain per instructions in
Adjusting the
Chain
Tension
in the
Maintenance
section of this
manual.
Oiler is not functioning.
Run at half throttle 30 to 45 seconds. Stop saw
and check for lubricant dripping from guide bar.
If lubricant is present, the chain may be dull or
bar may be damaged. If no lubricant is present
contact an authorised service centre.
Engine starts and runs, but
Chain brake is engaged.
Release chain brake. Refer to
Operating the
chain is not rotating.
Chain Brake
in the
Operation
section of this
manual.
Chain tension is too tight.
Tension chain per instructions in
Adjusting the
Chain
Tension
in the
Maintenance
section of this
manual.
Guide bar and chain assembled
Refer to
Replacing the Guide Bar and Chain
in
incorrectly.
the
Maintenance
section of this manual.
Guide bar and/or chain are
Inspect guide bar and chain for damage.
damaged.
Drive sprocket teeth damaged
Contact an authorised service centre for drive
sprocket
replacement.
