Parker AC30 series, User Manual

Page: 434 / 522

D-174
Parameter Reference
AC30 series Variable Speed Drive
Stall Trip
Parameters::Trips::Stall Trip
The function protects the motor from damage that may be caused by continuous operation beyond specification.
Parameter Name No. Path Default Range Units Writable
Stall Limit Type 0906
Parameters::Trips::Stall Trip
2 0:TORQUE
1:CURRENT
2:TORQUE OR CURRENT
ALWAYS
This parameter determines whether the stall trip operates on motor toque, on motor current, on motor torque or motor current.
Stall Time 0907 Parameters::Trips::Stall Trip 120.000 0.100 to 2000.000 s ALWAYS
The time after which a stall condition will cause a trip.
Stall Torque Active 0909
Parameters::Trips::Stall Trip NEVER
TRUE if tripped under torque trip operation
Stall Current Active 0910
Parameters::Trips::Stall Trip NEVER
TRUE is tripped under current trip operation
Stall Speed Feedback 0911 Parameters::Trips::Stall Trip x. -200 to 200 % NEVER
A copy of the speed Feedback in Hz
Functional Description
If Stall Limit Type is set to TORQUE and the estimated load exceeds the active TORQUE LIMIT for a time greater than Stall Time, then the stall trip
will become active.
If the Stall Limit Type is set to CURRENT and the measured current exceeds the active Current Limit for a time greater than
Stall Time, then the
stall trip will become active.