Parker AC30 series, User Manual

Page: 100 / 522

6-22
Safe Torque Off
AC30 series Variable Speed Inverter
STO IMPLEMENTATION WITH SAFETY CONTROL UNIT
This example improves on the previous one by showing the resetting from a STO stop. The example shows wiring and terminal numbering for a
Siemens 3TK2827, but similar products are available from other vendors. Use of this Siemens part does not imply it is suitable for the user’s application.
The user must select and assess appropriate equipment.
Note: On power-up, the safety control unit outputs are OPEN; thus the STO state is requested of the inverter. The latter responds by energising KA1 if both
channels are active and healthy. KA1 is used as a self-check for the reset cycle of the safety control unit. If a reset cannot be achieved due to KA1
being de-energised, a fault may be present and must be resolved by the user before relying on the STO function. See Fault Operation on page 6-14.
DRIVE
START
DRIVE
STOP
SAFETY
DEMAND
INVERTER STO
24VDC
SAFETY CONTROL UNIT
RESET
KA1
KA1
POWER
SUPPLY
THIS WIRING MUST BE WITHIN THE CONTROL CUBICLE.
X10/01 X10/03 X10/06 X13/02 X12/01 X12/05
X10/02 X10/04 X10/05 X12/06
A1
Y10 Y11 Y12 Y21 Y22
13 23
A2 PE Y33 Y34
14 24