Parker AC30 series, User Manual

Page: 341 / 522

Parameter Reference
D-81
AC30 series Variable Speed Drive
General Purpose IO
Monitor::Inputs and Outputs
Parameters::Option IO::General Purpose IO
The General Purpose IO parameters configure the use of the four IO Options, (
Error! Bookmark not defined. ). This group of parameters is only
visible when an IO Option is selected.
Parameter Name No. Path Default Range Units Writable
Anin 11 Value 1181
Monitor::Inputs and Outputs
Parameters::Option IO::General Purpose
IO
x.xx -100.00 to 100.00 %
NEVER
(Terminal X21.2) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 12 Value 1182 Same as PNO 1181 x.xx -100.00 to 100.00 % NEVER
(Terminal X21.3) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 13 Value 1183
Same as PNO 1181
x.xx -100.00 to 100.00 %
NEVER
(Terminal X21.4) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 11 Offset 1461
Setup::Inputs and Outputs::Option
Parameters::Option IO::General Purpose
IO
0.00 Min to Max %
ALWAYS
The offset is expressed as a percentage of the hardware range. For example an offset of 10% is equivalent to 1V on the input.
The offset is added to the measured value.
Anin 11 Scale 1462 Same as PNO 1461 1.0000 Min to Max ALWAYS
The scale is a simple multiplication factor. The input voltage is converted to a percentage value. 1461 Anin 11 Offset is added and the
result is multiplied by Scale. The result is presented in parameter 1181 Anin 11 Value .