Parker AC30 series, User Manual

Page: 128 / 522

9-3
Setup Wizard
AC30 series Variable Speed Inverter
Application selection
Selection of the specific Macro and associated parameters.
PNO Parameter Validity Comment
Setup Application? Select YES to configure the application parameters, NO to skip this section
1900 Selected Application
BA
SIC
SP
E
ED
CO
NT
RO
L
AUT
O
/M
ANU
AL
CO
NT
RO
L
SP
EE
D
RA
IS
E/
LO
W
ER
SP
EE
D
PRE
S
ET
S
PRO
CE
S
S P
ID
AF
E
1937 Disable Coast Stop ● ● ● ● ●
1938 Disable Quickstop ● ● ● ● ●
1901 RL Ramp Time ● Sets the rate of change of the output of the Raise/Lower ramp.
1902 RL Reset Value ● The value of the Raise/Lower ramp output when reset.
1903 RL Maximum Value ● The upper limit of the Raise/Lower ramp output.
1904 RL Minimum Value ● The lower limit of the Raise/Lower ramp output
1916 Preset Speed 0 ● The preset speed output when the selected preset is 0.
1917 Preset Speed 1 ● The preset speed output when the selected preset is 1.
1918 Preset Speed 2 ● The preset speed output when the selected preset is 2.
1919 Preset Speed 3 ● The preset speed output when the selected preset is 3.
1920 Preset Speed 4 ● The preset speed output when the selected preset is 4.
1921 Preset Speed 5 ● The preset speed output when the selected preset is 5.
1922 Preset Speed 6 ● The preset speed output when the selected preset is 6.
1923 Preset Speed 7 ● The preset speed output when the selected preset is 7.
1926 PID Setpoint Negate ● Changes the sign of the setpoint input.
1927 PID Feedback
Negate
● Changes the sign of the feedback input.
1928 PID Prop Gain ● The proportional gain of the PID controller.
1929 PID Integral TC ● The integral time constant of the PID controller.
1930 PID Derivative TC ● The derivative time constant of the PID controller.
1931 PID Output Filter TC ● The time constant of the first order filter used to filter the PID output.
1932 PID Output Pos Limit ● The maximum positive excursion, (limit), of the PID controller.
1933 PID Output Neg Limit ● The maximum negative excursion, (limit), of the PID controller.
1934 PID Output Scaling ● The overall scaling factor which is applied after the positive and negative limit
clamps