Parker AC30 series, User Manual

Page: 350 / 522

D-90
Parameter Reference
AC30 series Variable Speed Drive
Parameter Name No. Path Default Range Units Writable
Anin 02 Offset 0959
Same as PNO 957
0.00 Min to Max %
ALWAYS
The offset is expressed as a percentage of the hardware range selected by 0002 Anin 02 Type . For example, with the -10..10V range
an offset of 10% is equivalent to 1v on the input.
The offset is added to the measured value.
Anin 02 Scale 0960 Same as PNO 957 1.0000 Min to Max ALWAYS
The scale is a simple multiplication factor. The input voltage is converted to a percentage value. 0959 Anin 02 Offset is added and the
result is multiplied by 0960 Anin 02 Scale . The result is presented in parameter 0041 Anin 02 Value .
Anout 01 Type
0003 Same as PNO 1 0 Same as PNO 2 ALWAYS
Analog output 1 is associated with terminal X11.3
The signal processing electronics for analog output 1 supports two output ranges:
0. -10..10V
1. 0..10V
Anout 01 Scale 0686
Setup::Inputs and Outputs::Base IO
Parameters::Inputs And Outputs::IO
Configure
1.0000 Min to Max
ALWAYS
The scale is a simple multiplication factor applied to 0042 Anout 01 Value .
Anout 01 Offset 1108
Setup::Inputs and Outputs::Base IO
Parameters::Inputs And Outputs::IO
Configure
0.00 Min to Max %
ALWAYS
The offset is expressed as a percentage of the hardware range selected by 0003 Anout 01 Type . For example, with the -10..10V
range an offset of 10% is equivalent to 1v on the output.
The demand value 0042 Anout 01 Value is multiplied by 0686 Anout 01 Scale then added to the Offset. The resultant value is then
limited to -100 to 100%, (for the -10..10V type) or 0..100%, (for the 0..10V range).