Parker AC30 series, User Manual

Page: 127 / 522

Setup Wizard
9-2
AC30 series Variable Speed Inverter
Setup Wizard Stages
The Setup Wizard is divided into sections. With the exception of the first group of parameters, each section may be skipped. The first group of
parameters sets the inverter operating environment.
PNO Parameter Comment
1141 View Level Select the view level, Operator, Technician or Engineer.
1005 Language Select the required language to be used on the GKP. There may be a slight pause while the inverter adopts the
selected language.
1002 Update Firmware Select YES to update the inverter’s firmware. Only visible in Engineering view mode with a firmware file on the SD
Card.
1006 Run Wizard Select YES to continue. Select NO to exit with the new settings for View Level and Language
1000 Reset to Defaults Changing this parameter to TRUE then pressing OK resets all parameters back to the default value determined by
the inverters hardware configuration. If this choice is left FALSE all parameters retain their previously set values.
1186 Time and Date Only shown if an IO option with RTC hardware is fitted.
0944 Web Access Set to FULL to allow access to parameter values via the web page.
1738 Enable Auto Save Set to TRUE to automatically save parameter values as they are entered on the GKP and Web page. Set to
FALSE to enable the manual save feature.
All parameters are saved on completion of the GKP wizard regardless of the setting of this parameter. Also, this
parameter is always saved when changed.
0961 Drive Name Defaults to show the Ethernet MAC address