Parker AC30 series, User Manual

Page: 325 / 522

Parameter Reference
D-65
AC30 series Variable Speed Drive
Parameter Name No. Path Default Range Units Writable
Actual Speed rps 0394 Same as PNO 393 x.xx -1500.00 to 1500.00 rev/s NEVER
This parameter changes according to the Control Strategy :

In Vector Control mode the parameter shows the calculated mechanical speed of the motor shaft in revolutions per second.

In Volts-Hertz Control mode, the parameter shows the motor synchronous speed in revolutions per second.
Actual Speed Percent 0395
Same as PNO 393
x.xx -200.00 to 200.00 %
NEVER
This parameter changes according to the Control Strategy
•
In Vector Control mode the parameter shows the calculated mechanical speed of the motor shaft as a percentage of the user
maximum speed setting (
100% Speed in RPM in the Scale Setpoint function).
•
In Volts-Hertz Control mode, the parameter shows the electrical drive output frequency as a percentage of the user maximum
speed setting (
100% Speed in RPM in the Scale Setpoint function).
DC Link Volt Filtered 0396
Same as PNO 393
x. 0 to 1000 V
NEVER
This shows the filtered voltage across the dc link capacitors.
id 0397 Parameters::Motor Control::Feedbacks x.x -500.0 to 500.0 % NEVER
Current in the flux axis (Vector Control)
iq 0398 Parameters::Motor Control::Feedbacks x.x -500.0 to 500.0 % NEVER
Current in the torque axis (Vector Control)
Actual Torque 0399 Same as PNO 393 x.x -500.0 to 500.0 % NEVER
Calculated torque, based on the Iq current.