Parker AC30 series, User Manual

Page: 349 / 522

Parameter Reference
D-89
AC30 series Variable Speed Drive
IO Configure
Setup::Inputs and Outputs
Parameters::Inputs And Outputs::IO Configure
These parameters are used to configure the input signal processing.
Parameter Name No. Path Default Range Units Writable
Anin 01 Type 0001 Setup::Inputs and Outputs::Base IO
Parameters::Inputs And Outputs::IO
Configure 0 0:-10..10 V
1:0..10 V
2:0..20 mA
3:4..20 mA ALWAYS
Analog input 1 is associated with terminal X11.1
The signal processing electronics for analog input 1 supports four input ranges.
Anin 01 Offset 0957
Setup::Inputs and Outputs::Base IO
Parameters::Inputs And Outputs::IO
Configure
0.00 Min to Max %
ALWAYS
The offset is expressed as a percentage of the hardware range selected by 0001 Anin 01 Type . For example, with the 4..20mA range
an offset of 10% is equivalent to 1.6mA on the input.
The offset is added to the measured value.
Anin 01 Scale 0958
Same as PNO 957
1.0000 Min to Max
ALWAYS
The scale is a simple multiplication factor. The input voltage or current is converted to a percentage value. 0957 Anin 01 Offset is
added and the result is multiplied by 0958 Anin 01 Scale . The result is presented in parameter 0039 Anin 01 Value .
Anin 02 Type 0002 Same as PNO 1 0 0:-10..10 V
1:0..10 V ALWAYS
Analog input 2 is associated with terminal X11.2
The signal processing electronics for analog input 2 supports two input ranges.