Parker AC30 series, User Manual

Page: 158 / 522

10-8
Trips & Fault Finding
AC30 series Variable Speed Inverter
Runtime Alerts
A Runtime Alert is a fault that indicates a permanent hardware error. The Runtime Alert display is of the form
RUNTIME ALERT
CODE 00000000 xx
CODE is a number in the range 0 to 65000. The following value is used to provide additional information to assist Parker Hannifin Technical
Support personnel.
CODE ERROR Possible Reason for Error
1 to
255
Internal exception
 VCM not secured to power stack
 Option not secured correctly to VCM control card

Earth bonding failure.

Fault during firmware upgrade
12 Memory access
 Attempt to read or write to protected memory. Most likely this will be due to a configuration error. Press OK
several times until the drive resets correctly, then replace the configuration using PDQ.
 Record the error message and contact Technical Support
1001
to
1003
Processor overload
 Select a lower switching frequency, ( Parameters::Motor Control::Pattern Generator::Stack Frequency)
 Record the error message and contact Technical Support
1006
Memory overflow
 Reduce the complexity of the application

Reduce the number of parameters being accessed via the on board Modbus TCP protocol
 Reduce the number of parameters being accessed by the fieldbus communications option.
1007
Uninitialized pointer
 Record the error message and contact Technical Support
1010,
1101
to
1113
Initialization error 
Record the error message and contact Technical Support
1200
to
1299
Communications option
error
 Ensure the communications option is correctly fitted
 Update the firmware in the inverter.
 Replace the communications option
1300 Ethernet fault 
Record the error message and contact Technical Support
1301
Modbus server
 Record the error message and contact Technical Support