Parker AC30 series, User Manual

Page: 365 / 522

Parameter Reference
D-105
AC30 series Variable Speed Drive
Motor Nameplate
Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor Nameplate
Only available if IM MOTOR selected in
Control Mode.
In this function you enter the details of the motor under control and any available motor nameplate information.
Refer to Induction Motor Data parameters which are determined by the Auto Tune feature for example the
Magnetising Current, Stator
Resistance, Leakage Inductance, Mutual Inductance
and
Rotor time Constant
for model parameters.
Note
Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or
Autotune problems may occur if you do.
Parameter Name No. Path Default Range Units Writable
Rated Motor Current 0455 Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor
Nameplate 1.00 0.00 to 10000.00 A STOPPED
Rated motor current on the name plate
Base Voltage 0456
Same as PNO 455
400.00 0.00 to 1000.00 V
STOPPED
The rated motor voltage on the name plate
Base Frequency 0457 Same as PNO 455 50.00 0.00 to 1000.00 Hz STOPPED
The base motor frequency on the name plate
Motor Poles 0458 Same as PNO 455 4, 2 to 1000 STOPPED
Motor poles on the nameplate
Nameplate Speed 0459
Same as PNO 455
1420.00 0.00 to 100000.00 RPM
STOPPED
Rated motor speed on the name plate