NETGEAR GS108Tv3 User Manual Download Page 88 | Manualshive

Page: 88 / 492

NETGEAR GS108Tv3 User Manual Download Page 88

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

88

The dynamic host mapping table shows host name-to-IP address entries that the switch
learned. The following table describes the dynamic host fields.

Table 18. Dynamic Host Mapping information

Field

Description

Host

Lists the host name that you assign to the specified IP address.

Total

Time since the dynamic entry was first added to the table.

Elapsed

Time since the dynamic entry was last updated.

Type

The type of the dynamic entry.

IPv4/IPv6 Addresses

Lists the IP address associated with the host name.

Configure green Ethernet settings

You can configure the green Ethernet features to reduce power consumption.

Configure the global green Ethernet settings

You can configure the global green Ethernet settings.

To configure the global green Ethernet settings:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

.

4.

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.

«
...
86
87
88
89
90
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments