manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 118 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 118

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

118

7. 

To view additional details about a port, click the name of the port in the Interface column of 
the Port Information table.

The following table describes the detailed local information that displays for the selected 
port.

System Capabilities 

The primary functions that the switch supports.

Port Information

Interface

The interface associated with the rest of the data in the row.

Port ID Subtype

The type of information used to identify the interface in the Port ID field.

Port ID

The port number.

Port Description

The user-defined description of the port.

Advertisement

The TLV advertisement status of the port. 

Field

Description

Managed Address

Address SubType

The type of address the management interface uses, such as an IPv4 
address.

Address

The address used to manage the device.

Interface SubType

The port subtype.

Interface Number

The number that identifies the port.

MAC/PHY Details

Auto Negotiation Supported

Indicates whether the interface supports port speed autonegotiation. The 
option is True (enabled) or False (disabled).

Auto Negotiation Enabled

The port speed autonegotiation support status. The option is True (enabled) 
or False (disabled).

Auto Negotiation Advertised 

Capabilities

The port speed autonegotiation capabilities such as 1000BASE-T half-duplex 
mode or 100BASE-TX full-duplex mode.

Operational MAU Type

The Medium Attachment Unit (MAU) type. The MAU performs physical layer 
functions, including digital data conversion from the Ethernet interface 
collision detection and bit injection into the network.

MED Details

Capabilities Supported

The MED capabilities enabled on the port.

Current Capabilities

The TLVs advertised by the port.

Device Class

Network Connectivity indicates that the device is a network connectivity 
device.

Field

Description

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments