8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Configure Quality of Service
User Manual
270
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
QoS > CoS > Advanced > DSCP to Queue Mapping
.
7.
For each DSCP value, select from the corresponding
Queue
menu which internal traffic
class must be mapped to the DSCP value.
The traffic class is the hardware queue for a port. Higher traffic class values indicate a
higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in
higher queues to be sent.
The allowed Per Hop Behavior (PHBs) values, besides other DSCP experimental values,
are as follows:
•
Class Selector (CS) PHB
. These values are based on IP precedence.
•
Assured Forwarding (AF) PHB
. These values define four main levels to sort and
manipulate some flows within the network.
•
Expedited Forwarding (EF) PHB
. These values are used to prioritize traffic for
real-time applications. In many situations, if the network exceeded traffic and you
need some bandwidth guaranteed for an application, the EF traffic must receive this
rate independently of the intensity of any other traffic attempting to transit the node.
The Other DSCP Values (Local/Experimental Use) section allows you to set non-default
values for advanced settings.
8.
Click the
Apply
button.
Your settings are saved.