manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 102 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 102

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure System Information 

User Manual

102

6. 

Select 

System > SNMP > SNMP V1/V2 > Community Configuration

. 

7. 

In the 

Management Station IP

 field, specify the IP address of the management station.

8. 

In the 

Management Station IP Mask

 field, specify the subnet mask to associate with the 

management station IP address.

Together, the management station IP address and the management station IP mask 
denote a range of IP addresses from which SNMP clients can use that community to 
access this device. If either the management station IP address or management station 
IP mask value is 0.0.0.0, access is allowed from any IP address. Otherwise, every client’s 
address is ANDed with the mask, as is the management station IP address. If the values 
are equal, access is allowed. 

For example, if the management station IP address and management station IP mask 
settings are 192.168.1.0/255.255.255.0, any client with an IP address in the range from 
192.168.1.0 to 192.168.1.255 (inclusive) is allowed access. To allow access from only 
one station, use a management station IP mask value of 255.255.255.255, and use that 
computer’s IP address as the client address.

9. 

In the 

Community String

 field, specify a community name.

10. 

From the 

Access Mode

 menu, select the access level for this community, which is either 

Read/Write

 or 

Read Only

. 

11. 

From the 

Status

 menu, select to enable or disable the community.

If you select 

Enable

, the community name must be unique among all valid community 

names or the set requests are rejected. If you select 

Disable

, the community name 

becomes invalid.

12. 

Click the 

Add

 button. 

The selected community is added.

Modify an existing SNMP community

To modify an existing SNMP community:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments