manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 373 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 373

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

373

The previous figure shows the MAC Binding Configuration page for model GS110TPv3.

7. 

From the 

ACL ID

 menu, select an ACL.

The fixed selection from the 

Direction

 menu is 

Inbound

, which means that MAC ACL 

rules are applied to traffic entering the interface.

8. 

In the 

Sequence Number

 field, optionally specify a number to indicate the order of the 

access list relative to other access lists already assigned to the interface and direction. 

A low number indicates high precedence order. If a sequence number is already in use 

for the interface and direction, the specified access list replaces the currently attached 
access list using that sequence number. If you do not specify the sequence number, a 
sequence number that is one number greater than the highest sequence number 
currently in use for the interface and direction is used. The range is from 1 to 
4294967295.

9. 

To add the selected ACL to a port or LAG, in the Ports table or LAG table, click the port or 
LAG so that a check mark displays.

You can add the ACL to several ports and LAGs.

The Ports and LAG tables display the available interfaces for ACL bindings. All 
nonrouting physical interfaces, VLAN interfaces, and interfaces participating in LAGs are 
listed.

10. 

Click the 

Apply

 button.

Your settings are saved.

The following table describes the information displayed in the Interface Binding Status table.

Table 69.  Interface Binding Status table

 

Field

Description

Interface

The interface of the ACL assigned.

Direction

The selected packet filtering direction for the ACL.

ACL Type

The type of ACL assigned to the selected interface and direction.

ACL ID

The ACL name identifying the ACL assigned to the selected interface and direction.

Sequence Number

The sequence number signifying the order of the specified ACL relative to other ACLs 
assigned to the selected interface and direction.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments