manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 226 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 226

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

226

7. 

In the 

VLAN ID

 field, specify the VLAN ID on which the MLD snooping querier is 

administratively enabled and for which a VLAN exists in the VLAN database.

8. 

From the 

Querier Election Participate Mode

 menu, select to enable or disable the querier 

participation election mode for MLD snooping.

When this mode is disabled, on detecting another querier of same version in the VLAN, 
the snooping querier moves to a non-querier state. When this mode is enabled, the 
snooping querier participates in querier election where the lowest IP address wins the 
querier election and operates as the querier in that VLAN. The other querier moves to 
non-querier state.

9. 

In the 

Querier VLAN Address

 field, specify the snooping querier address to be used as the 

source address in periodic MLD queries sent on the specified VLAN.

10. 

Click the 

Apply

 button. 

Your settings are saved.

The following table describes the nonconfigurable information displayed on the page.

Table 47.  MLD Snooping Querier VLAN Configuration information

 

Field

Description

Operational State

The operational state of the MLD snooping querier on a VLAN. It can be in any of the 
following states:

• Querier

. Snooping switch is the querier in the VLAN. The snooping switch sends 

out periodic queries with a time interval equal to the configured querier query 
interval. If the snooping switch sees a better querier in the VLAN, it moves to 
non-querier mode.

• Non-Querier

. Snooping switch is in non-querier mode in the VLAN. If the querier 

expiry interval timer is expired, the snooping switch moves into querier mode.

• Disabled

. Snooping querier is not operational on the VLAN. The snooping querier 

moves to disabled mode when MLD snooping is not operational on the VLAN or 
when the querier address is not configured or the network management address is 
also not configured.

Operational Version

The operational MLD protocol version of the querier.

Last Querier Address

The IP address of the last querier from which a query was snooped on the VLAN.

Last Querier Version

The MLD protocol version of the last querier from which a query was snooped on the 
VLAN.

Operational Max 
Response Time

The maximum response time to be used in the queries that are sent by the snooping 
querier.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments