Home
/
NETGEAR
/
GS108Tv3
/
User Manual

NETGEAR GS108Tv3, User Manual, Page: 157 / 492

Share

Page: 157 / 492

NETGEAR GS108Tv3 User Manual Download Page 157

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure Switching

User Manual

157

The following table describes the nonconfigurable information displayed on the page.

Table 30. VLAN status

Field

Definition

VLAN ID

The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is from 1 to 4093.

VLAN Name

The name of the VLAN.

VLAN Type

The VLAN type:

• Default

(VLAN ID = 1). Always present.

• Auto-VoIP

(VLAN ID = 4088). Always present.

• Auto-VIdeo

(VLAN ID = 4089). Always present.

• Static

. A VLAN that you configured.

• Dynamic

. A VLAN that is created through GVRP registration, that you did not convert

to a static VLAN, and that GVRP can therefore remove.

Routing Interface

If VLAN routing is configured for the VLAN, the interface that is associated with the VLAN.

Member Ports

The ports, LAGs, or both that are included in the VLAN.

Configure the PVID settings for an interface

You can assign a port VLAN ID (PVID) to an interface. The following requirements apply to a
PVID:

•

By default, the PVID for each port is 1.

•

If you do not specify another value, the default VLAN PVID is used.

•

To change the port’s default PVID, you must first create a VLAN that includes the port as
a member (see

Configure VLAN membership on page

To configure PVID settings:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

.

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

«
...
155
156
157
158
159
...
»

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments