manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 301 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 301

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

301

The range is from 1 to 30. The default value is 5. 

9. 

From he 

Accounting Mode

 menu, select to enable or disable RADIUS accounting on the 

server.

The default is Disabled.

10. 

Click the 

Apply

 button. 

Your settings are saved.

The following table describes the nonconfigurable fields displayed on the page.

Table 60.  RADIUS Configuration information

Field

Description

Current Server IP Address

The IP address of the current server. This field is blank if no servers are 
configured.

Number of Configured 
Servers

The number of configured authentication RADIUS servers. The value can range 
from 0 to 3. 

Configure a RADIUS authentication server on the switch

You view and configure various settings for a RADIUS server configured on the switch.

Add a primary RADIUS authentication server to the switch

To add a primary RADIUS authentication server to the switch and view or reset the 
RADIUS authentication server statistics:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

2. 

Launch a web browser.

3. 

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see 

Access the switch on-network and 

connected to the Internet on page

 

19

 or 

Access the switch off-network on page

 

30

. 

The login page displays.

If the NETGEAR Business page displays, see

 

Register and access the switch with your 

NETGEAR account on page

 

34

.

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments