manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 242 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 242

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Routing 

User Manual

242

IcmpInTimeExcds

The number of ICMP time exceeded messages received.

IcmpInParmProbs

The number of ICMP parameter problem messages received.

IcmpInSrcQuenchs

The number of ICMP source quench messages received.

IcmpInRedirects

The number of ICMP redirect messages received.

IcmpInEchos

The number of ICMP echo (request) messages received.

IcmpInEchoReps

The number of ICMP echo reply messages received.

IcmpInTimestamps

The number of ICMP timestamp (request) messages received.

IcmpInTimestampReps

The number of ICMP timestamp reply messages received.

IcmpInAddrMasks

The number of ICMP address mask request messages received.

IcmpInAddrMaskReps

The number of ICMP address mask reply messages received.

IcmpOutMsgs

The total number of ICMP messages that this entity attempted to send. This 
counter includes all those counted by icmpOutErrors.

IcmpOutErrors

The number of ICMP messages that this entity did not send due to 
problems discovered within ICMP such as a lack of buffers. This value does 
not include errors discovered outside the ICMP layer such as the inability of 
IP to route the resultant datagram. In some implementations there might be 
no types of error that contribute to this counter's value.

IcmpOutDestUnreachs

The number of ICMP destination unreachable messages sent.

IcmpOutTimeExcds

The number of ICMP time exceeded messages sent.

IcmpOutParmProbs

The number of ICMP parameter problem messages sent.

IcmpOutSrcQuenchs

 The number of ICMP source quench messages sent.

IcmpOutRedirects

The number of ICMP redirect messages sent. For a host, this is always 
zero, since hosts do not send redirects.

IcmpOutEchos

The number of ICMP echo (request) messages sent.

IcmpOutEchoReps

The number of ICMP echo reply messages sent.

IcmpOutTimestamps

The number of ICMP timestamp (request) messages.

IcmpOutTimestampReps

The number of ICMP timestamp reply messages sent.

IcmpOutAddrMasks

The number of ICMP address mask request messages sent.

Table 51.  IP Statistics information (continued)

Field

Description

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments