8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
356
6.
Select
Security > Traffic Control > Port Security > Security MAC Address
.
7.
From the
Port List
menu, select the individual interface.
Port security must be enabled on the selected interface.
The Dynamic MAC Address Table displays the MAC addresses and their associated
VLANs that were learned on the selected port.
Field
Description
VLAN ID
The VLAN ID corresponding to the MAC address.
MAC Address
The MAC addresses learned on a specific port.
8.
To convert the dynamically learned MAC address to a statically locked addresses, select the
Convert Dynamic Address to Static
check box.
9.
Click the
Apply
button.
The dynamic MAC address entries are converted to static MAC address entries in a
numerically ascending order until the static limit is reached.
The Number of Dynamic MAC Addresses Learned field displays the number of
dynamically learned MAC addresses on a specific port.
10.
To refresh the page with the latest information about the switch, click the
Update
button.
Configure protected ports
If you configure a port as protected, it does not forward traffic to any other protected port on
the switch, but it does forward traffic to unprotected ports. You can configure the ports as
protected or unprotected.
To configure protected ports:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.