manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 159 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 159

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Configure Switching 

User Manual

159

VLAN IDs range from 1 to 4093. Use a hyphen (-) to specify a range or a comma (,) to 
separate VLAN IDs in a list. Spaces and zeros are not permitted. You can specify port 
tagging for the VLAN only if the port that you want to add as a tagged port is also member 
of the VLAN. To reset the VLAN tag configuration to the defaults, use the 

None

 keyword. 

12. 

From the 

Acceptable Frame

 menu, specify one if the following types of frames that can be 

received on the port:

•

Admit All

. Untagged frames or priority-tagged frames that are received on the port 

are accepted and assigned the value of the port VLAN ID for the port. This is the 
default selection.

•

VLAN Only

. Untagged frames or priority-tagged frames that are received on the port 

are discarded.

•

Admit Untagged Only

. Untagged frames that are received on the port are accepted.

With the 

Admit All

 and 

VLAN Only

 selections, VLAN-tagged frames are forwarded in 

accordance to the 802.1Q VLAN specification.

13. 

From the 

Ingress Filtering

 menu, select one of the following options:

•

Enable

. The frame is discarded if the port is not a member of the VLAN with which 

this frame is associated. In a tagged frame, the VLAN is identified by the VLAN ID in 
the tag. In an untagged frame, the VLAN is the port VLAN ID specified for the port that 
received this frame. 

•

Disable

. All frames are forwarded in accordance with the 802.1Q VLAN bridge 

specification. The default is Disable.

14. 

In the 

Port Priority

 field, specify the default 802.1p priority assigned to untagged packets 

arriving at the port. 

You can enter a number from 0 to 7.

15. 

Click the 

Apply

 button. 

Your settings are saved.

The following table describes the nonconfigurable fields.

Table 31.  Nonconfigurable fields on the PVID Configuration page

 

Field

Description

Current Ingress Filtering

Indicates whether ingress filtering is enabled for the interface.

Untagged VLANs

The number of untagged VLANs for the interface.

Tagged VLANs

The number of tagged VLANs for the interface.

Forbidden VLANs

The number of forbidden VLANs for the interface.

Dynamic VLANs

The number of dynamically added VLANs for the interface.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments