manualshive.com logo in svg

NETGEAR GS108Tv3, User Manual, Page: 405 / 492

Share
Download
NETGEAR GS108Tv3 User Manual Download Page 405

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

405

4. 

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is 

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter 
the Insight network password for the last Insight network location.

For information about the credentials, see 

Credentials for the local browser interface on 

page

 

32

.

5. 

Click the 

Login

 button.

The System Information page displays.

6. 

Select 

Security > ACL> Advanced > VLAN Binding Configuration

.

7. 

In the 

VLAN ID

 field, enter the VLAN ID to which the binding must apply.

The direction for packet filtering is always inbound.

8. 

In the 

Sequence Number

 field, enter an optional sequence number.

You can specify an optional sequence number to indicate the order of this access list 
relative to other access lists that are already assigned to the VLAN ID and selected 
direction. A lower number indicates a higher precedence order. If a sequence number is 
already in use for the VLAN ID and selected direction, the specified access list replaces 
the currently attached ACL using that sequence number. If you do not specify a sequence 
number (the value is 0), a sequence number that is one greater than the highest 
sequence number currently in use for the VLAN ID and selected direction is used.The 
range is from 1 to 4294967295.

9. 

From the 

ACL Type

 menu, select the type of ACL. 

You can select a MAC ACL, IP ACL, or IPv6 ACL.

10. 

From the 

ACL ID

 list, select the ID or name of the ACL that must be bound to the specified 

VLAN.

11. 

Click the 

Add

 button.

The VLAN ACL binding is added.

Remove a VLAN ACL binding

To remove a VLAN ACL binding:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or 
connect directly to a switch that is off-network using an Ethernet cable.

Summary of Contents for GS108Tv3













































































































































































































































































































































































































































































































Reviews:

No comments